18V DV ROTARY HAMMER Drill Driver
18V high speed concrete drilling
LED light, SDS-plus bit system, slow start for accurate drilling
Ideal for lighting equipment, conduit pipe and switch box installation
18V Cordless Rotary Hammer Drill & Driver
High speed drilling performance with a dual function rotary hammer or drill & driver. Featuring a complete concrete plug installation by one tool, 4.2Ah Li-ion battery, SDS-plus bit system and a 5-stage clutch plus drill.
High Performance Cordless Rotary Hammer Drill & Driver
The Panasonic EY78A1LS2G57 18V Rotary Hammer Drill & Driver is light and has a high speed drilling, yet powerful thanks to its 4.2Ah Li-ion battery. It is easy and comfortable to hold and features an excellent cooling and dust proof design for continuous use as well as an SDS-plus bit system. It offers five torque levels, which can be adjusted according to the hardness of the material or the type of material being fastened, an LED light for greater visibility and a shoulder strap.
Air System Hammer
The Rotary Hammer Drill & Driver offers a high speed concrete drilling using an air type, Cup Piston Method hammer.
Five Torque Levels
The torque level can be adjusted according to the hardness of the material or the type of material being drilled, approximately from 1.5 to 5.4N.m (1.0N.m per stage, total 5 stage).
Tough Tools for Tough Conditions
Many things can happen at a job site such as unexpected incidents, water contact, or exposure to dust; which can cause a tool to malfunction. By incorporating the Tough Tool IP technology, it reassures that Panasonic cordless tools perform at its best in the most difficult situations.
Dust and Water Resistant Level IP56
The International Protection Code classifies the degree of protection provided against intrusion of solid foreign objects and liquids in electrical machinery and fixtures as defined by the IEC standards.
LEVEL 5 - Dust Protected
LEVEL 6 - Protected Against Powerful Water Jets
Performance Protection
An additional rubber cap seals the switch and protects it against dust and water.
Dual Voltage for Better Versatility
Dual voltage technology offers powerful performance with either a 14.4V or 18V battery. A special dual voltage circuit detects the voltage of the attached battery pack and controls the current and voltage flows to the tool to ensure optimum performance.
18V High Power
With 18.0 voltage, it’s easy to use the Rotary Hammer Drill & Driver packed with high speed drilling.
Compact and Powerful
Panasonic’s new generation 18V 4.2Ah Li-ion battery cell delivers high power and long lasting battery capacity. The 18V Li-ion batteries are durable and has great working capacity per charge.
Durable New Design
Over-discharge prevention sensor
Prevents over-discharge to avoid lasting cell damage or recharge problems.
Battery overheat protection sensor
Cuts off power to the motor before the battery temperature rises.
Individual monitoring of battery cell voltage
Each cell monitored by sensor to ensure optimal discharge control.
Battery capacity indicator
To reduce the risk of battery power running low, users can check status on the indicator.
Battery sensor
Flashing lamps indicates overheating battery. Battery is automatically reactivated when temperature drops.
Heat resistance layer technology
In cases where seperator is damaged and abnormal heat is created, HRL acts to contain this heat, just like a Fire wall.
NNP technology
Panasonic’s own developed Nickel oxide material provides higher capacity and higher reliability.
-
18V high speed concrete drilling
-
LED light, SDS-plus bit system, slow start for accurate drilling
-
Ideal for lighting equipment, conduit pipe and switch box installation
Comes with battery charger and carrying case
Feature | • Complete concrete plug installation by one tool • Dual function rotary hammer or drill & driver • High speed concrete drilling by air type (Cup piston method) hammer • Slow start switch for accurate drilling with a clean finish • Bit adapter (EY9HX403E) as standard equipment • SDS-plus bit system • LED light to support work • With 2 battery packs, battery charger (EY0L82) and carrying case | ||
Speed at No load (Rotation only) | 0-1,250 min-1 (rpm) | ||
Blows Rate per Minute (Rotation with hammering) | 0-4,750 bpm | ||
Clutch torque (approx) | 1.5-5.4 N.m (1.0 N.m per stage, total 5 stage) | ||
Size (LxHxW) / Weight (including battery pack) | 249 mm x 272 mm x 64 mm / 2.60 kg | ||
Battery Pack and Charging time (using EY0L82B) | 18V / 4.2Ah (EY9L51B) / Usable:55min. / Full:70min. | ||
Capacity | Drilling + Fastening: Concrete Screw | Holes in Concrete and Screws Fastened: ø3.5 mm x 30 mm | 200 pcs/charge |
Holes in Concrete and Screws Fastened: ø4 mm x 25 mm | 200 pcs/charge | ||
Drilling + Fastening: Plastic Anchor Fastening Application | Holes in Concrete and Screws Fastened: ø6 mm x 30 mm | 150 pcs/charge | |
Holes in Concrete and Screws Fastened: ø4.5 mm x 25 mm | 150 pcs/charge | ||
Drilling | Holes in Concrete: ø3.5 mm x 30 mm | 250 holes/charge | |
Holes in Concrete: ø10.5 mm x 40 mm | 90 holes/charge | ||
Holes in Concrete: ø12.5 mm x 40 mm | 45 holes/charge | ||
Holes in Concrete: ø16.5 mm x 40 mm | 15 holes/charge |