14.4V Cordless Impact Driver - Battery and Charger Included
High power 155N.m
LED light, electric brake, variable speed control/reversible
Kit comes with 4.0Ah battery, charger and carrying case
14.4V Cordless Impact Driver
Works hard, stays cool and comfortable. Featuring a brushless motor, 4.0Ah Li-ion battery, advanced ergonomics, multiple modes for all applications and a robust build for heavy-duty use.
High Performance Cordless Impact Driver
The Panasonic EY75A7LH2F57 14.4V Dual Voltage Cordless Impact Driver is extremely lightweight and compact, yet powerful thanks to an impressive 155N.m of torque performance equipped with a 4.0Ah Li-ion battery. With precision variable speed control, it is ready for work with just a short 50-minute full charge time. Featuring a handy LED light for user-friendly operation in dark areas and an electric brake for added safety.
Advanced Ergonomics
New Brushless Motor
The all new shorter brushless motor helped designers to achieve our most compact high power impact driver with optimum centre-balanced ergonomics for more comfortable working, even in narrow spaces.
Hard
Fastening long bit and bolt.
Battery Capacity in M12 Hightensile Bolt: More than 30,000pcs¹
New brushless motor has approximately 200%² more life cycles. And with a thicker motor shaft (ø5mm) ensures more strength for heavy-duty use.
¹ Panasonic test result by M12 High strength bolt (2sec). ² Compared with Panasonic conventional brushed motor.
Various Support Design
Panasonic’s Impact Driver’s new design includes a grip pattern design to prevent slipping and increase operator comfort. It also has a new tapered Bit-holder design for easy bit change and LED light to support better work functions.
Tough Tools for Tough Conditions
Many things can happen at a job site such as unexpected incidents, water contact, or exposure to dust; which can cause a tool to malfunction. By incorporating the Tough Tool IP technology, it reassures that Panasonic cordless tools perform at its best in the most difficult situations.
Dust and Water Resistant Level IP56
The International Protection Code classifies the degree of protection provided against intrusion of solid foreign objects and liquids in electrical machinery and fixtures as defined by the IEC standards.
LEVEL 5 - Dust Protected
LEVEL 6 - Protected Against Powerful Water Jets
Switch
An additional rubber cap seals the switch and protects it against dust and water.
Dual Voltage for Better Versatility
Dual voltage technology offers powerful performance with either a 14.4V or 18V battery. A special dual voltage circuit detects the voltage of the attached battery pack and controls the current and voltage flows to the tool to ensure optimum performance.
18V 3.0Ah
With the 18V 3.0Ah battery, the application speed and working capacity goes up.
Compact and Powerful
Panasonic’s new generation 14.4V 4.0Ah Li-ion battery cell delivers high power and long lasting battery capacity. The 14.4V Li-ion batteries are durable and has great working capacity per charge.
Durable New Design
Over-discharge prevention sensor
Prevents over-discharge to avoid lasting cell damage or recharge problems.
Battery overheat protection sensor
Cuts off power to the motor before the battery temperature rises.
Individual monitoring of battery cell voltage
Each cell monitored by sensor to ensure optimal discharge control.
Battery sensor
Flashing lamps indicates overheating battery. Battery is automatically reactivated when temperature drops.
Heat resistance layer technology
In cases where seperator is damaged and abnormal heat is created, HRL acts to contain this heat, just like a Fire wall.
NNP technology
Panasonic’s own developed Nickel oxide material provides higher capacity and higher reliability.
-
High power 155N.m
-
LED light, electric brake, variable speed control/reversible
-
Kit comes with 4.0Ah battery, charger and carrying case
| Feature | • Self-drilling screw mode • Variable speed control / reversible • LED light to support work • Electric brake • With 2 battery packs, battery charger (EY0L82) and carrying case | ||
| Max. Torque | High/Hard Mode (M14 High tensile bolt tightening for 3 sec.) | 14.4V:155Nm / 18V:160Nm | |
| Medium Mode (M14 High tensile bolt tightening for 3 sec.) | 14.4V:130Nm / 18V:130Nm | ||
| Low/Soft Mode (M10 High tensile bolt tightening for 3 sec.) | 14.4V:26Nm / 18V:26Nm | ||
| Self-drilling screw Mode (M14 High tensile bolt tightening for 3 sec.) | 14.4V:130Nm / 18V:130Nm | ||
| Speed at No Load | High/Hard Mode | 0-2500rpm | |
| Medium Mode | 0-1450rpm | ||
| Low/Soft Mode | 0- 950rpm | ||
| Self-drilling screw Mode | 0-2500rpm | ||
| Impact/min. | High/Hard Mode | 0-3100ipm | |
| Medium Mode | 0-2900ipm | ||
| Low/Soft Mode | 0-1900ipm | ||
| Self-drilling screw Mode | 0-1200ipm | ||
| Size (LxHxW) / Weight (including battery pack) | LJ2G | 118mm x 242mm x 66mm / 1.70kg | |
| PN2G | 118mm x 226mm x 66mm / 1.65kg | ||
| LS2F | 118mm x 234mm x 66mm / 1.55kg | ||
| Battery Pack and Charging time (using EY0L82B) | LJ2G | 18V / 5.0Ah (EY9L54B) Usable:65min. / Full:80min. | |
| PN2G | 18V / 3.0Ah (EY9L53B) Usable:45min. / Full:60min. | ||
| LS2F | 14.4V / 4.2Ah (EY9L45B) Usable:50min. / Full:60min. | ||
| LJ2G Capacity | Screwing - Wood Screws in Yellow pine | dia.4.2mm x 75mm 700pcs | |
| Screwing - Self-Drilling Screws in SPC | dia.4mm x 13mm, t=1.6mm 980pcs | ||
| Bolting - Standard Tensil Bolt | M16 x 25mm, t=10mm 1150pcs M12 x 25mm, t=10mm 2700pcs | ||
| Drilling - High Tensil Bolt | M12 x 25mm, t=10mm 360pcs | ||
| Drilling - Holes in Plaster Board + Plywood (DL core) | dia.21mmm (Plaster Board t=12.5mm, Plywood t=12.0mm) | ||
| PN2G Capacity | Screwing - Wood Screws in Yellow pine | dia.4.2mm x 75mm 420pcs | |
| Screwing - Self-Drilling Screws in SPC | dia.4mm x 13mm, t=1.6mm 590pcs | ||
| Bolting - Standard Tensil Bolt | M16 x 25mm, t=10mm 680pcs M12 x 25mm, t=10mm 1600pcs | ||
| Drilling - High Tensil Bolt | M12 x 25mm, t=10mm 220pcs | ||
| Drilling - Holes in Plaster Board + Plywood (DL core) | dia.21mmm (Plaster Board t=12.5mm, Plywood t=12.0mm) | ||
| LS2F Capacity | Screwing - Wood Screws in Yellow pine | dia.4.2mm x 75mm 490pcs | |
| Screwing - Self-Drilling Screws in SPC | dia.4mm x 13mm, t=1.6mm 750pcs | ||
| Bolting - Standard Tensil Bolt | M16 x 25mm, t=10mm 1050pcs M12 x 25mm, t=10mm 2300pcs | ||
| Drilling - High Tensil Bolt | M12 x 25mm, t=10mm 300pcs | ||
| Drilling - Holes in Plaster Board + Plywood (DL core) | dia.21mmm (Plaster Board t=12.5mm, Plywood t=12.0mm) 140pcs | ||