14.4V (4.2AH) DV IMPACT DRIVER
High power 155N.m
LED light, electric brake, variable speed control/reversible
Ideal for Bolt/Nut Fastening, Scaffolding Assemble & Disassemble, Long Wood Screw/Lag Screw Fastening
14.4V Cordless Impact Driver
Works hard, stays cool and comfortable. Featuring a new brushless motor, 4.2Ah Li-ion battery, advanced ergonomics, multiple modes for all applications and a robust build for heavy-duty use.
High Performance Cordless Impact Driver
The Panasonic EY75A7LS2F57 14.4V Dual Voltage Cordless Impact Driver is extremely lightweight and compact, yet powerful thanks to an impressive 155N.m of torque performance equipped with 4.2Ah Li-ion battery capacity. This makes the impact driver ideal for using for long periods and for overhead work. With precision variable speed control, it is ready for work with just a short 50 minute full charging time. Featuring a handy LED light for user-friendly operation in dark areas and an electric brake for added safety.
Advanced Ergonomics
New Brushless Motor
The all new shorter brushless motor helped designers to achieve our most compact high power impact driver with optimum centre-balanced ergonomics for more comfortable working, even in narrow spaces.
Multiple Modes for all Applications
Fastening long bit and bolt.
Robust Build for Heavy-Duty Use
New brushless motor has approximately 200%² more life cycles. And with a thicker motor shaft (ø5mm) ensures more strength for heavy-duty use.
¹ Panasonic test result by M12 High strength bolt (2sec). ² Compared with Panasonic conventional brushed motor.
Various Support Design
Panasonic’s Impact Driver’s new design includes a grip pattern design to prevent slipping and increase operator comfort. It also has a new tapered Bit-holder design for easy bit change and LED light to support better work functions.
Tough Tools for Tough Conditions
Many things can happen at a job site such as unexpected incidents, water contact, or exposure to dust; which can cause a tool to malfunction. By incorporating the Tough Tool IP technology, it reassures that Panasonic cordless tools perform at its best in the most difficult situations.
Dust and Water Resistant Level IP56
The International Protection Code classifies the degree of protection provided against intrusion of solid foreign objects and liquids in electrical machinery and fixtures as defined by the IEC standards.
LEVEL 5 - Dust Protected
LEVEL 6 - Protected Against Powerful Water Jets
Performance Protection
An additional rubber cap seals the switch and protects it against dust and water.
Dual Voltage for Better Versatility
Dual voltage technology offers powerful performance with either a 14.4V or 18V battery. A special dual voltage circuit detects the voltage of the attached battery pack and controls the current and voltage flows to the tool to ensure optimum performance.
18V 3.0Ah
With the 18V 3.0Ah battery, the application speed and working capacity goes up.
Compact and Powerful
Panasonic’s new generation 14.4V 4.2Ah Li-ion battery cell delivers high power and long lasting battery capacity. The 14.4V Li-ion batteries are durable and has great working capacity per charge.
Durable New Design
Over-discharge prevention sensor
Prevents over-discharge to avoid lasting cell damage or recharge problems.
Battery overheat protection sensor
Cuts off power to the motor before the battery temperature rises.
Individual monitoring of battery cell voltage
Each cell monitored by sensor to ensure optimal discharge control.
Battery sensor
Flashing lamps indicates overheating battery. Battery is automatically reactivated when temperature drops.
Heat resistance layer technology
In cases where seperator is damaged and abnormal heat is created, HRL acts to contain this heat, just like a Fire wall.
NNP technology
Panasonic’s own developed Nickel oxide material provides higher capacity and higher reliability.
-
High power 155N.m
-
LED light, electric brake, variable speed control/reversible
-
Ideal for Bolt/Nut Fastening, Scaffolding Assemble & Disassemble, Long Wood Screw/Lag Screw Fastening
Comes with battery charger and carrying case
| Feature | • Self-drilling screw mode • Variable speed control / reversible • LED light to support work • Electric brake • With 2 battery packs, battery charger (EY0L82) and carrying case | ||
| Max. Torque | High/Hard Mode (M14 High tensile bolt tightening for 3 sec.) | 14.4V:155Nm / 18V:160Nm | |
| Medium Mode (M14 High tensile bolt tightening for 3 sec.) | 14.4V:130Nm / 18V:130Nm | ||
| Low/Soft Mode (M10 High tensile bolt tightening for 3 sec.) | 14.4V:26Nm / 18V:26Nm | ||
| Self-drilling screw Mode (M14 High tensile bolt tightening for 3 sec.) | 14.4V:130Nm / 18V:130Nm | ||
| Speed at No Load | High/Hard Mode | 0-2500rpm | |
| Medium Mode | 0-1450rpm | ||
| Low/Soft Mode | 0- 950rpm | ||
| Self-drilling screw Mode | 0-2500rpm | ||
| Impact/min. | High/Hard Mode | 0-3100ipm | |
| Medium Mode | 0-2900ipm | ||
| Low/Soft Mode | 0-1900ipm | ||
| Self-drilling screw Mode | 0-1200ipm | ||
| Size (LxHxW) / Weight (including battery pack) | LJ2G | 118mm x 242mm x 66mm / 1.70kg | |
| PN2G | 118mm x 226mm x 66mm / 1.65kg | ||
| LS2F | 118mm x 234mm x 66mm / 1.55kg | ||
| Battery Pack and Charging time (using EY0L82B) | LJ2G | 18V / 5.0Ah (EY9L54B) Usable:65min. / Full:80min. | |
| PN2G | 18V / 3.0Ah (EY9L53B) Usable:45min. / Full:60min. | ||
| LS2F | 14.4V / 4.2Ah (EY9L45B) Usable:50min. / Full:60min. | ||
| Capacity | Screwing (LJ2G) | Wood Screws in Yellow pine: dia.4.2mm x 75mm | 700pcs |
| Self-Driling Screws in SPC: dia.4mm x 13mm, t=1.6mm | 980pcs | ||
| Bolting (LJ2G) | Standard Tensil Bolt: M16 x 25mm, t=10mm | 1150pcs | |
| Standard Tensil Bolt: M12 x 25mm, t=10mm | 2700pcs | ||
| Drilling (LJ2G) | High Tensil Bolt: M12 x 25mm, t=10mm | 360pcs | |
| Holes in Plaster Board + Plywood (DL core): dia.21mmm (Plaster Board t=12.5mm, Plywood t=12.0mm) | - | ||
| Screwing (PN2G) | Wood Screws in Yellow pine: dia.4.2mm x 75mm | 420pcs | |
| Self-Driling Screws in SPC: dia.4mm x 13mm, t=1.6mm | 590pcs | ||
| Bolting (PN2G) | Standard Tensil Bolt: M16 x 25mm, t=10mm | 680pcs | |
| Standard Tensil Bolt: M12 x 25mm, t=10mm | 1600pcs | ||
| Drilling (PN2G) | High Tensil Bolt: M12 x 25mm, t=10mm | 220pcs | |
| Holes in Plaster Board + Plywood (DL core): dia.21mmm (Plaster Board t=12.5mm, Plywood t=12.0mm) | - | ||
| Screwing (LS2F) | Wood Screws in Yellow pine: dia.4.2mm x 75mm | 490pcs | |
| Self-Driling Screws in SPC: dia.4mm x 13mm, t=1.6mm | 750pcs | ||
| Bolting (LS2F) | Standard Tensil Bolt: M16 x 25mm, t=10mm | 1050pcs | |
| Standard Tensil Bolt: M12 x 25mm, t=10mm | 2300pcs | ||
| Drilling (LS2F) | High Tensil Bolt: M12 x 25mm, t=10mm | 300pcs | |
| Holes in Plaster Board + Plywood (DL core): dia.21mmm (Plaster Board t=12.5mm, Plywood t=12.0mm) | 140pcs | ||