14.4V Cordless Hammer Drill - 2 X Batteries and Charger Included
High power 50.0N.m
LED light, electric brake, variable speed control/reversible
Kit comes with 2x 4.0Ah batteries, charger and carrying case
14.4V Cordless Hammer Drill & Driver
High power drilling with extreme durability in masonry, wood and metal. Featuring a brushless motor, 4.0Ah Li-ion battery, 13mm heavy duty keyless chuck and a hybrid switch.
14.4V Cordless Hammer Drill & Driver
The Panasonic 14.4V Dual Voltage Cordless Hammer Drill & Driver is lightweight and compact, yet powerful thanks to a powerful of 50.0N.m, with a 4.0Ah Li-ion battery. With precision variable speed control/reversible, an 18-stage clutch, optimum rotation speed control plus high power brushless motor. The EY79A2LH2F57 is ready for work with just a short 65-minute charging time. Featuring a handy LED light for user-friendly operation in dark areas, a heavy-duty keyless chuck, and an electric brake for added safety.
New Brushless Motor
Without brushes and commutator which can reduce the lifetime of the tool, the motor lasts approximately twice compared with brushed motor*.
* Compared with Panasonic conventional brushed motor.
Powerful to the Finish
The new, large diameter brushless motors generate high power and efficiency (32Nm of torque - 18V battery). Plus the newly designed control circuit increases stable current flow to motor by more than 70%*. This enables high power output to be evenly maintained until the task is completed even during high-load operation.
* Compared with previous brushless motor.
Increased Efficiency and Flexibility
The new ‘Speed Control Function’ allows the user to select from three different low rotation speed settings, based on allowable maximum speeds for metal hole saws. It greatly reduces ‘run out’ when using metal hole saws and prevents surface scorching on stainless steel and other materials.
The advanced ‘Smooth Start’ electronics allow easy, precise speed control, enabling the ultimate control when starting drilling or working with small screws in precise applications.
Dust and Water Resistant Level IP56
The International Protection Code classifies the degree of protection provided against intrusion of solid foreign objects and liquids in electrical machinery and fixtures as defined by the IEC standards.
LEVEL 5 - Dust Protected
LEVEL 6 - Protected Against Powerful Water Jets
Switch
An additional rubber cap seals the switch and protects it against dust and water.
Dual Voltage for Better Versatility
Dual voltage technology offers powerful performance with either a 14.4V or 18V battery. A special dual voltage circuit detects the voltage of the attached battery pack and controls the current and voltage flows to the tool to ensure optimum performance.
Durable New Design
Over-discharge prevention sensor
Prevents over-discharge to avoid lasting cell damage or recharge problems.
Battery overheat protection sensor
Cuts off power to the motor before the battery temperature rises.
Individual monitoring of battery cell voltage
Each cell monitored by sensor to ensure optimal discharge control.
Battery sensor
Flashing lamps indicates overheating battery. Battery is automatically reactivated when temperature drops.
Heat resistance layer technology
In cases where seperator is damaged and abnormal heat is created, HRL acts to contain this heat, just like a Fire wall.
NNP technology
Panasonic’s own developed Nickel oxide material provides higher capacity and higher reliability.
-
High power 50.0N.m
-
LED light, electric brake, variable speed control/reversible
-
Kit comes with 2x 4.0Ah batteries, charger and carrying case
| Feature | • Optimum rotation speed control • Variable speed control / reversible • LED light to support work • Electric brake • With 2 battery packs, battery charger (EY0L82) and carrying case | ||
| Max. Torque | Stalling Torque | High/Hard Mode | 14.4V : 10Nm / 18V : 12Nm |
| Low/Soft Mode | 14.4V : 28Nm / 18V : 32Nm | ||
| Instant Torque | Low/Soft Mode | 14.4V : 40Nm / 18V : 50Nm | |
| Speed at No Load | High/Hard Mode | 14.4V : 70-1350rpm / 18V : 70-1580rpm | |
| Low/Soft Mode | 14.4V : 30-400rpm / 18V : 30-470rpm | ||
| Blows Rate per Minute | High/Hard Mode | 14.4V : 1260-24300bpm / 18V : 1260-28400bpm | |
| Low/Soft Mode | 14.4V : 540-7200bpm / 18V : 540-8500bpm | ||
| Clutch Torque | 1.0-4.4Nm | ||
| Max.Drill Diameter | Low/Soft Mode | In Wood - 14.4V : dia.35mm / 18V : dia.38mm In Metal - 14.4V : dia.13mm / 18V : dia.13mm | |
| Max.Screws Driving | In Wood screw - 14.4V : dia.6.8mm / 18V : dia.8mm In Self-drilling screw - 14.4V : dia.6mm / 18V : dia.6mm | ||
| Size (LxHxW) / Weight (including battery pack) | LJ2G | 188mm x 250mm x 68mm / 2.10kg | |
| PN2G | 188mm x 234mm x 68mm / 1.85kg | ||
| LS2F | 188mm x 242mm x 68mm / 1.95kg | ||
| Battery Pack and Charging time (using EY0L82B) | LJ2G | 18V / 5.0Ah (EY9L54B) Usable:65min. / Full:80min. | |
| PN2G | 18V / 3.0Ah (EY9L53B) Usable:45min. / Full:60min. | ||
| LS2F | 14.4V / 4.2Ah (EY9L45B) Usable:50min. / Full:60min. | ||
| LJ2G Capacity | Screwing: Wood Screws in Yellow pine – High Mode | dia.4.1mm x 25mm - 1750pcs | |
| Screwing: Wood Screws in Yellow pine – Low Mode | dia.8mm x 80mm - 430pcs | ||
| Screwing: Self-Driling Screws in SPC – High Mode | dia.4mm x 13mm, t=1.6mm - 1250pcs | ||
| Drilling: Holes in Plaster Board + Plywood (Wooding core) – High Mode | dia.50mm, t=24.5mm (Plaster Board t=12.5mm, Plywood t=12.0mm) - 60pcs | ||
| Drilling: Holes in SPC (Hole Saw) – High Mode | dia.21mm, t=1.6mm - 50pcs | ||
| Drilling: Holes in SPC (Hole Saw) – Low Mode | dia.33mm, t=1.6mm - 75pcs | ||
| Drilling: Holes in Yellow Pine – High Mode | dia.18mm x 120mm - 140pcs | ||
| Drilling: Holes in Yellow Pine – Low Mode | dia.30mm x 40mm - 280pcs | ||
| Drilling: Holes in Mortar – High Mode | dia.6.5mm x 30mm - 220pcs | ||
| Drilling: Holes in Mortar – Low Mode | dia.10mm x 30mm - 160pcs | ||
| Drilling: Holes in Masonry – High Mode | dia.5mm x 40mm depth - 260pcs | ||
| PN2G Capacity | Screwing: Wood Screws in Yellow pine – High Mode | dia.4.1mm x 25mm - 1050pcs | |
| Screwing: Wood Screws in Yellow pine – Low Mode | dia.8mm x 80mm - 260pcs | ||
| Screwing: Self-Driling Screws in SPC – High Mode | dia.4mm x 13mm, t=1.6mm - 740pcs | ||
| Drilling: Holes in Plaster Board + Plywood (Wooding core) – High Mode | dia.50mm, t=24.5mm (Plaster Board t=12.5mm, Plywood t=12.0mm) - 35pcs | ||
| Drilling: Holes in SPC (Hole Saw) – High Mode | dia.21mm, t=1.6mm - 30pcs | ||
| Drilling: Holes in SPC (Hole Saw) – Low Mode | dia.33mm, t=1.6mm - 45pcs | ||
| Drilling: Holes in Yellow Pine – High Mode | dia.18mm x 120mm - 80pcs | ||
| Drilling: Holes in Yellow Pine – Low Mode | dia.30mm x 40mm - 170pcs | ||
| Drilling: Holes in Mortar – High Mode | dia.6.5mm x 30mm - 130pcs | ||
| Drilling: Holes in Mortar – Low Mode | dia.10mm x 30mm - 100pcs | ||
| Drilling: Holes in Masonry – High Mode | dia.5mm x 40mm depth - 150pcs | ||
| LS2F Capacity | Screwing: Wood Screws in Yellow pine – High Mode | dia.4.1mm x 25mm - 1600pcs | |
| Screwing: Wood Screws in Yellow pine – Low Mode | dia.8mm x 80mm - 300pcs | ||
| Screwing: Self-Driling Screws in SPC – High Mode | dia.4mm x 13mm, t=1.6mm - 830pcs | ||
| Drilling: Holes in Plaster Board + Plywood (Wooding core) – High Mode | dia.50mm, t=24.5mm (Plaster Board t=12.5mm, Plywood t=12.0mm) | ||
| Drilling: Holes in SPC (Hole Saw) – High Mode | dia.21mm, t=1.6mm - 35pcs | ||
| Drilling: Holes in SPC (Hole Saw) – Low Mode | dia.33mm, t=1.6mm - 50pcs | ||
| Drilling: Holes in Yellow Pine – High Mode | dia.18mm x 120mm - 110pcs | ||
| Drilling: Holes in Yellow Pine – Low Mode | dia.30mm x 40mm - 180pcs | ||
| Drilling: Holes in Mortar – High Mode | dia.6.5mm x 30mm - 130pcs | ||
| Drilling: Holes in Mortar – Low Mode | dia.10mm x 30mm - 110pcs | ||
| Drilling: Holes in Masonry – High Mode | dia.5mm x 40mm depth - 200pcs | ||